CAME VER KIT Uživatelský manuál stáhnout pdf (Strana 38)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

Photo 6.6

Shallow Deep

Cut the parts from

the frames.

As shown in photo 6.6, each wheel has a shallower

indentation on the outer side and a deeper indentation

on the inner side.

Photo 6.7

Photo 6.8

Photo 6.9

Photo 6.11 (hubs)

Photo 6.10 (nut tighteners)

Prepare the quantity of screws, nuts, and spring washers

shown in photo 6.12. Note that the screws and nuts to be

used are included in the sports tire set, while the spring

washers are included in the body-related parts set.

Photo 6.12

Use the nuts and screws included

in the sports tire set

12 spring washers

Cut the parts from the frames shown in photo 6.7 so

that the result looks like photo 6.8. Remove any burrs.

Each of the wheels (total four) needs to have one of the

hubs shown in photo 6.11 mounted on it.

The nut tighteners are used to tighten nuts. These will

be used later, so put them aside in a safe place.

The parts shown in photo 6.9 are not needed.

28 nuts

12 screws

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 91 92

Žádné komentáře

CAME VER KIT Uživatelský manuál Strana 38