CAME VER KIT Uživatelský manuál stáhnout pdf (Strana 44)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

7. Mounting the Servo Motor

7.1. Preparing the Servo Horn

For this task you will need the contents of the servo motor package, as shown in photo 7.1. The parts we will use

are the red servo horn, the servo motor itself, and, as shown in photo 7.2, two screw and washer assemblies (dia. 3

× 15 mm, flat washer dia. 6 mm) and two nuts.

Photo 7.1 Photo 7.2

Photo 7.3 Photo 7.4

Photo 7.5

Use nippers to cut off at the indentation lines the two

side pieces of the servo horn. The result should look

as shown in photo 7.4 after the two pieces are cut off.

Be careful that parts do not fly

away and get lost when cutting.

Red servo horn

Remove the white servo horn attached to the servo

motor (photo 7.5).

Note: Be careful not to lose the screw you

removed to take off the white servo horn

because it will be used to secure the red

servo horn in place.

Be careful not to lose the

screw.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 91 92

Žádné komentáře

CAME VER KIT Uživatelský manuál Strana 44