CAME VER KIT Uživatelský manuál stáhnout pdf (Strana 62)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

8.4. Mounting the Gearboxes on the Main Board

Photo 8.74 Photo 8.75

Prepare the items shown in the photos: the gearboxes, the main board cut from the universal plate, four black

screws, four spring washers, and four nuts.

1……………10

10……………1

Underside

Photo 8.76 Photo 8.77

Fit the spring washers onto the black screws as shown in

the photo.

Place the main board so that the side with the

indentations for flathead screws (the underside) is facing

upward. As shown in the photo, insert black screws in

the first and tenth holes from the ends of the bottom

portion of the board.

Right motor

Note: Short wires

Left motor

Note: Long wires

Underside

Photo 8.78 Photo 8.79

Be careful not to confuse the right motor and the left

motor.

Secure the motors in place by tightening nuts in the

locations indicated by the circle.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 91 92

Žádné komentáře

CAME VER KIT Uživatelský manuál Strana 62