CAME VER KIT Uživatelský manuál stáhnout pdf (Strana 42)

Micon Car Kit, Ver. 5.1Body Assembly Manual (Version for RX62T)

6.3. Mounting the Bearings

Photo 6.31 Photo 6.32

Photo 6.33

With the bearings arranged as shown in photo 6.34,

insert a shaft (photo 6.33) into each bearing from the

outer side and install an E-ring.

Do not install E-rings on the other end yet!

Photo 6.34

Prepare the parts shown in photo 6.31

(parts: 2 front wheel shafts, 4 E-rings).

E-rings

Threaded end

Insert shaft from outer side of bearing.

Outer

side

Outer

side

Inner

side

Photo 6.35

Once the front wheel shafts have been inserted into

the bearings and secured with E-rings, the task is

complete.

Mount E-rings.

Note: Make sure the bearings are

arranged as shown.

As shown in photo 6.32, use the radio pliers to fit an

E-ring onto the groove in a front wheel shaft on the

threaded end.

Fit another E-ring onto the groove in the other front

wheel shaft on the threaded end (photo 6.33). Do not

install E-rings on the other end of the shafts yet.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Žádné komentáře

CAME VER KIT Uživatelský manuál Strana 42